How to Install Nock Out® Lighted Nocks

/ in In Action Blog /

Installing Lighted Nocks | Nock Out® Contender Nocks

Nock Out® lighted nocks has adult an impressive lighted nock for compound shooters that is durable and accurate while being simple and piece of cake to use. The Contender vertical lighted nocks fit 10,H,S/GT shafts with the included universal bushing kit contained in each bundle, making them the perfect fit no affair what size arrow shaft is in your archery setup.

Nock Out® includes the needed bushings to make the Contender lighted nocks truly a universal fit for whatsoever arrow in the industry from 5mm all the fashion upwards to 6.5mm shafts. Installing the nocks at home is an easy process that requires few tools. Some items yous will desire to have on mitt include bowstring wax, a pair of needle nose pliers, and maybe a universal nock tool for inserting and indexing nocks. Organize your arrow shafts, tools, and Contender nocks on a make clean level piece of work surface, and follow these few steps to smoothly install your new Contender lighted nocks by Nock Out.

Lancaster Archery Supply – Lighted Nock Contender Install

Steps to Proper Lighted Nock Setup

  • Remove the orange C clench located midway on the nock torso with needle nose pliers. This clip is used strictly for packaging purposes.
  • Identify the pointer shaft size and the appropriate bushing for your pointer shaft.
    • Contender nocks fit 5mm or 10 shafts directly from the parcel with no bushing required.
    • 6mm (H) and vi.5mm (South/GT) shafts require the apply of the included appropriate bushing.
  • For 5mm or X shafts at .204" ID the Contender Nocks are ready to install after the removal of the orange C clamp. Simply apply a liberal amount of bowstring wax to the lower nock trunk and insert the nock into the shaft. Take care to index the nock to the pointer fletching according to your pointer rest. Never strength your Contender Nocks into the shaft by forcing the nock and shaft down onto a difficult surface without a nock tool.
  • When installing the Nock Out® Contender nocks into 6mm (H) or half dozen.5mm (S/GT) arrow shafts, first remove the orange C clip on the lower nock body. Identify the appropriate bushing for your arrow shaft from the packaging. Insert the nock into the bushing before pushing the bushing into the arrow shaft. After installing the nock into the appropriate bushing with the orange C clip removed, employ liberal bowstring wax to the exterior of the bushing and insert into your arrow shaft. Take care to index the nock to the arrow fletching according to your arrow rest. Again, never force your Contender Nocks into the arrow shaft past forcing the nock and shaft downward onto a hard surface without a nock tool.
  • Key takeaways to installing the Contender lighted nocks are to be sure and utilize bowstring wax on the nock body during installation, do not force the nock into the arrow shaft by pressing the nock down onto a hard surface, and remember to index the nock according to your arrow's fletching and bow rest.

The Contender lighted nocks are activated by string pressure at the shot. During the installation process it is easy to pull back on an installed nock that has been activated to plough off the illumination. Exist sure your lighted nocks are not activated when you finish the installation process to conserve bombardment life.