How To Repaire Chipped Tub Enamel

Download Article

Download Article

Fixing a chipped bathtub is a practice-it-yourself projection that will save yous from hiring an expensive professional. Whether your tub merely has a few small chips, or information technology is badly damaged and needs to be refinished, these are both projects that y'all will observe kits for at your local home improvement store. With a little elbow greasy, your tub will await similar new in only a matter of days!

1. one

   Buy a 2-component epoxy kit for scrap repair. Wait in the adhesive or bathroom repair section of a abode hardware store. Buy a kit that comes with both the catalyst and hardener that you volition mix together to create the epoxy.^[1]

   • Near epoxy flake repair kits come in shades of white to match the most common color of bathtubs. Try to choose a kit that will closely lucifer the shade of your bathtub, or 2 kits that you tin mix together to create the correct color.
   • Epoxy repair kits piece of work to fix fries in all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs.

2. 2

   Scrub the damaged area with a sponge and soap or tub cleaner, so dry out information technology. Employ warm h2o and dish detergent or a household tile and tub cleaner to clean the chipped area. Thoroughly dry out the area with a make clean rage after you lot terminate cleaning information technology.^[ii]

   • You tin as well use acetone or rubbing alcohol to clean the surface area. Any product that removes grease and soap scum will work to make clean the chip.

   Advertisement

3. 3

   Follow the directions on your epoxy kit to mix the 2 components together. Some epoxy kits come up with a mixing tray and stirring stick for you to use. Mix the epoxy in a dispensable tray with a toothpick or matchstick if your kit didn't come with the mixing supplies.^[3]

   • Information technology'southward a expert idea to ready the tray on a slice of cardboard or some scraps of paper to catch any spills.

4. 4

   Apply the epoxy to the chip with a pocket-size spatula, paint castor, or lesser of a matchstick. Scoop up a small-scale amount of the epoxy with your chosen utensil. Spread information technology carefully in a thin layer over the chip by working in one direction and smooth out whatever spots where it pools.^[4]

   • Make certain that anything yous employ to employ the epoxy is disposable. Information technology volition be difficult to go the epoxy off of anything it touches.
   • It's easiest to start with a small amount of epoxy and add more layers than information technology is to put too much on and remove it.

5. 5

   Let the epoxy dry, then sand down the surface with 400-600 dust sandpaper. Follow the directions on your epoxy kit to allow information technology fully dry out. Gently sand the surface with 400- or 600-grit sandpaper until information technology feels shine like the residual of the tub.^[5]

   • Some epoxy will set in ii-3 hours, at which betoken you can sand. Other kits may suggest you to expect up to 24 hours before sanding.
   • Yous can add another layer of epoxy after sanding if you can still experience the chip. Then repeat the process.
   • Go on in mind that while this is volition assist hibernate minor chips, you may still be able to notice the patch. This volition be specially obvious if you try to fill a number of chips with the epoxy.^[vi]

   Advertisement

1. ane

   Purchase a bathtub refinishing kit at a dwelling house comeback center. Salvage yourself time by buying a whole kit that has everything you demand to refinish your tub. Most kits come up with tub cleaner, sandpaper, primer, refinishing paint, a paint tray, a castor, and a roller.^[7]

   • Check that the kit comes with a durable resin coating for your tub. Some cheaper kits come with an epoxy coating, which chips and discolors faster.
   • Refinishing kits can cost from well-nigh $thirty-$100 USD.
   • Tub refinishing kits piece of work to refinish all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs. The kits will provide a new porcelain-like finish to these kinds of tubs.

2. two

   Ventilate the bath, cover the floors, and put on protective gear. Open up all the windows and put a fan in the bathroom to ventilate it. Cover the floors with heavy-duty plastic sheets to keep them rubber during the refinishing process. Put on a face mask and goggles.^[8]

   • You tin can as well drapery plastic sheets over fixtures like the toilet and sink to protect them.

3. iii

   Clean the bathtub with the cleaner from the kit. Read the directions on the cleaner to apply it to the tub and apply a sponge to scrub the tub clean. Rinse the tub out, then go over it with the sponge and cleaner 2 more than times to remove whatever soap scum and stains before you refinish it.^[nine]

   • If your kit did not come with cleaner, then buy an industrial force bathtub cleaner to employ.
   • Let the tub completely air dry, or speed up the process with towels and a hair dryer.

4. four

   Sand the whole tub with the sandpaper in your kit to remove the old finish. Get-go with the everyman-dust sandpaper from your refinishing kit and sand the whole surface of the tub in circular motions past mitt, or with an electrical sander. Work your way up to the highest-grit sandpaper in your kit until the tub is completely smoothen.^[10]

   • Your refinishing kit should come with sandpaper to utilise. If your kit didn't come with sandpaper, and so commencement with 400-dust sandpaper and piece of work your way up to 2000-dust. Increase the grit of the sandpaper in increments of 200 until you reach 1000-grit sandpaper, then get up in increments of 500 until you end using 2000-grit sandpaper.

5. five

   Repair any chips or cracks in the tub with a ii-component epoxy chip repair kit. Follow the instructions to mix the two parts of the epoxy in a pocket-size tray. Use a small brush, spatula, or the lesser terminate of a matchstick to utilise sparse layers of epoxy to any fries. Look two-3 hours until the epoxy dries and sand the patches downward with 2000-grit sandpaper to lucifer the stop of the rest of the tub.^[11]

   • This will ensure that the tub has no chips or cracks and seal the surface before y'all employ the new finish.
   • Get a ii-component epoxy chip repair kit from the bathroom remodeling or adhesive section of a habitation improvement store if your kit did non come with it.

6. half dozen

   Put painter'southward tape on the walls and around whatsoever fitting. Tape forth the edges of the tub where they affect the walls and around the faucet and other fixtures. Even if you take a steady mitt, it'due south easy for paint to go astray!^[12]

   • Painter's tape is the blue masking tape that you tin can find at hardware and paint stores.

7. 7

   Apply 1 coat of primer with a brush and roller. Employ a roller to coil on the primer onto the big, flat sections of the tub similar the floor and sides, then use a brush to get into the corners and curved parts. Let it dry out for at to the lowest degree ii-3 hours before you start to paint on the new finish.^[13]

   • Priming the surface is an important office of ensuring that the new stop adheres correctly and then that you lot end upwards with the correct texture. Make sure that the primer is completely dry to the affect earlier you paint over it.

8. 8

   Pigment on 2-3 coats of the new finish with a brush and roller. Always pigment in 1 direction when y'all apply the new coat to your tub. Curl on the new finish to the floors and sides in even dorsum-and-forth rolls until the apartment area is completely covered. Fill in the corners and curves of the tub with even back-and-forth brush strokes. Permit each coat dry for at to the lowest degree 30 minutes before you put the next coat on.^[xiv]

   • Some kits may come up with a spray-on finish. If y'all use a sprayer instead of a brush or roller, endeavour to spray evenly and in 1 management. Make sure your walls and fixtures are well-protected past tape where there is a risk of paint spray striking them.

9. nine

   Let your bathtub sit for ii-3 days before you use it. The new finish needs to set completely before you run h2o over it. Consult your kit'due south directions for the exact drying fourth dimension for your specific finish.^[fifteen]

   • If you don't let the finish dry out long enough, you could end up with streaks and bubbles in the new coating and you will need to start the procedure again.
   • Your new DIY cease volition final for years, but keep in mind that professional finishes volition last fifty-fifty longer.
   • The chemicals used in this procedure tin can exist dangerous, and so it may exist a adept idea to stay somewhere else for a few days while the tub cures.^[16]

   Advertisement

Add together New Question

• Question

  How do you set a fleck in a porcelain tub?

  

  Art Fricke
  Abode Renovation & Repair Specialist

  Art Fricke is a home renovation and repair specialist and the owner of Art Tile & Renovation based in Austin, Texas. With over 10 years of experience, he specializes in bathroom and kitchen renovations. Art focuses on a single contractor approach to customized renovation work, and performs projects such as installing custom tile showers, fixing tiled shower leaks, replacing cracked tiles, and installing floor and wall tile.

  

  Habitation Renovation & Repair Specialist

  Expert Answer

  

  Support wikiHow by unlocking this good respond.

  If you lot just have a small, isolated fleck, you lot tin get enamel fix from a home improvement shop. Just dab a piffling on, and then let it dry out. Still, keep in mind that yous'll probably even so exist able to run across the patch, especially if yous're trying to comprehend a number of chips.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Things Yous'll Demand

• two-component epoxy chip repair kit
• Sponge
• Soap or household tub and tile cleaner
• Disposable tray and mixing stick
• Small spatula, castor, or matchstick
• 400-600 grit sandpaper

• Bathtub refinishing kit (tub cleaner, sandpaper, primer, refinishing paint, a paint tray, a brush, and a roller)
• 2-component epoxy chip repair kit
• Pocket-sized spatula, brush, or matchstick
• Face mask
• Goggles
• Fan
• Heavy-duty plastic sheets
• Painter's record

• If you don't desire to refinish your bathtub on your ain, y'all can hire a professional person who's specialized in refinishing tubs, instead.^[17]

Advert

Nigh This Commodity

Commodity Summary X

If you lot have a small bit in your bathtub, you tin can fix information technology with an epoxy kit. Before you start, scrub the damaged surface area of your tub clean with a sponge and some lather and water. Follow the directions on your epoxy kit for mixing the ii components together. Once they're mixed, employ a small spatula or a paintbrush to spread a sparse layer of the epoxy over the fleck. Wait for information technology to fully dry, which should take at least 2-3 hours, then utilize sandpaper to buff out the dried epoxy until its smooth. If your bathtub is desperately damaged, y'all tin can apply a bathtub refinishing kit to restore the finish. You'll need to sand the whole tub to remove the one-time stop, repair all the cracks with epoxy, and so paint on new primer and cease. To acquire how to prevent paint from getting on you lot tile, read on!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 81,513 times.

Did this article aid you?

Source: https://www.wikihow.com/Fix-a-Chipped-Bathtub

Posted by: rodriguezfrew1977.blogspot.com

Share this post